Exodus 36:20-34

CLV(i) 20 Then he made the hollow tapers for the tabernacle of standing acacia boards; 21 ten cubits was the length of one hollow taper, and a cubit and a half cubit the width of one hollow taper. 22 There were two sloping side boards to one hollow taper being projected one to another: thus he did for all the hollow tapers of the tabernacle. 23 And he made the hollow tapers for the tabernacle, twenty hollow tapers for the edge of the Negev southward;" 24 and forty sockets of silver he made under the twenty hollow tapers, two sockets under one hollow taper for its two sloping side boards, and two sockets under another hollow taper for its two sloping side boards. 25 Also for the second angle wall of the tabernacle for the north edge he made twenty hollow tapers, 26 with their forty sockets of silver, two sockets under one hollow taper and two sockets under another hollow taper. 27 Yet for the flanks of the tabernacle seaward he made six hollow tapers; 28 and two hollow tapers he made for the cutout corners of the tabernacle, in the flanks. 29 Then couplings came to be below, and they came to be coupled together to its top by the first ring. Thus he did for the two of them, for the two cutout corners. 30 There came to be eight hollow tapers and their silver sockets, sixteen sockets, two sockets for each, two sockets under one hollow taper. 31 Then he made bars of acacia wood, five for the hollow tapers of one angle wall of the tabernacle, 32 also five bars for the hollow tapers of the second angle wall of the tabernacle and five bars for the hollow tapers of the tabernacle for the flanks seaward; 33 and he made the middle bar in the midst of the hollow tapers to reach from end to end. 34 The hollow tapers he overlaid with gold; and their rings he made of gold, as housings for the bars, and he overlaid the bars with gold.